You have 0 items in your cart. View Cart | Go to Checkout

Peg Hook / Shaker Pegs. Oak or Maple

Shaker coat pegs are available, loose on their own, so that you can now make up your own Shaker style peg rails to any length, from a single coat hook to a complete room. These have plain tenons and simply need a 1/2 hole drilled in your timber of choice. They are left bare and ready to receive your own finish. The coat peg at the top of the picture is hand turned from local oak and except for the threading of the tenon is exactly the same as the pegs used on my oak peg rails. The lower coat peg is machine turned from Maple, which will stain and paint very well. It will also look good with a clear finish. Although not having the same fine detailing as my hand turned coat pegs, these Shaker coat pegs are exceptionally good value for money. Especially for large projects of where the cost of hand turned pegs can't be justified.

I have even used these in the kitchen to make mug hooks, this works equally well with the rail horizontal or vertical. Just space the hooks to suite your size mug or cup!

Oak coat Pegs have a round tenon 3/4'' long x 1/2'' diam ( 20mm x 13 mm ) and when fitted have a projection from the rail of 2 3/4'' ( 70 mm ) The body has a diameter of 3/4'' ( 20 mm ) and the head a diameter of 1'' ( 25 mm ) These dimensions are all historically correct and have been taken from known original examples.

Maple coat Pegs have a round tenon 5/8'' long x 1/2'' diam (16mm x 13 mm ) and have a projection from the rail face of 2 7/8'' ( 75 mm ) when fitted. The body has a diameter of 11/16'' ( 17 mm ) and the head a diameter of 7/8'' ( 22 mm )